Kramer Electronics Ltd.
VS-1616DN-EM
– Operating – Front Panel Buttons
19
•
You save time as execution is immediate and actions require no user confirmation.
•
No protection is offered to correct an erroneous action.
•
In the Confirm mode:
•
The TAKE button lights.
•
You enter an action and then confirm it by pressing the TAKE button.
•
Every action requires user confirmation, protecting against erroneous actions.
•
Execution is postponed until you confirm the action.
Failure to press the TAKE button within a few seconds results in the action timing out
automatically.
Toggling Between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes:
If the TAKE button is flashing, you cannot toggle between the At Once and Confirm modes. A
flashing TAKE button indicates that an action is currently pending confirmation.
1. Press TAKE to toggle between the At Once mode and the Confirm mode.
The TAKE button lights and actions now require user confirmation.
2. Press the lit TAKE button to toggle from the Confirm mode back to the At Once mode.
The TAKE button is no longer lit and actions no longer require user confirmation.
Confirming a Switching Action
Actions only require confirmation when the device is in the Confirm mode.
To confirm a switching action:
1. Using the numeric keypad, enter an output-input combination.
The TAKE button flashes.
2. Press the flashing TAKE button to confirm the action.
The action is confirmed and the TAKE button lights.
Switching Actions
This section describes how to:
•
Switch one input to one output (see
Switching One Input to One Output
).
•
Switch several inputs to several outputs (see
Switching Several Inputs to Several
).
•
).