![background image](http://html.mh-extra.com/html/kramer/vs-1616dn-em/vs-1616dn-em_user-manual_2001300055.webp)
Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
52
DTAxr-IN2-F16 / DTAxr-OUT2-F16 Configuration
The
DTAxr-IN2-F16
configuration table appears as follows:
DTAxr-IN2-F16 Input Card
Parameter
Description
Default
Audio
Select
AUD-Embedded
—HDMI audio is selected.
AUD-Analog
—Analog audio from the 16-pin terminal block is selected.
Note
: Not applicable when the audio port is set to output (ST=1).
AUD-
Embedded
ST
Sets the direction of the audio port:
0
—Audio is set to input
1
—Audio is set to output
Note
: This parameter affects both audio ports on the card. The direction of
the audio signal is indicated by the I/O LED above the terminal block:
ON
—Audio is set to input
OFF
—Audio is set to output
0
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
0
XTRA
Enables range extender. Off for distances of up to 100m at 4K@60Hz 4:2:0
or 4K@30Hz 4:4:4 or up to 130m at 2K; On for distances of up to 180m at
1080p @60Hz @24bpp.
*0:ON, 1:OFF.
Note
: Distances are valid when using Kramer BC-UNIKAT cables.
1
Reset Input
Re-power: power cycle the port.
Factory Reset: perform a factory reset of the port to default values.
Re-power
Volume
Sets the audio output volume (0
–70).
Note
: Not applicable when digital audio is selected.
50
Audio
Balance
Sets the audio output channel balance (0
–100).
Note
: Not applicable when digital audio is selected.
50
Audio Bass
Sets the audio output bass level (0
–15).
Note
: Not applicable when digital audio is selected.
7
Audio
Treble
Sets the audio output treble level (0
–15).
Note
: Not applicable when digital audio is selected.
7
Audio Mute
MUTE
—Mutes the audio input. Audio is unmuted if any of the audio
parameters are modified.
Non-MUTE
—Unmutes the audio input.
Note
: Not applicable when digital audio is selected.
Non-MUTE