Konica Minolta bizhub C203 Series, User Manual

Page: 479 / 534

C353/C253/C203 11-44
Utility mode
11
– Each time [+] or [-] is touched, the value is increased
or decreased by one increment.
9
Press the [Start] key.
The adjusted test pattern is printed.
10
Check the distance from the starting print position of the test pattern to the edge of the paper.
– Check that the distance has been adjusted to 4.2 mm.
– If more adjustment is necessary, repeat steps 8 and 9.
– To adjust the print position for a different paper type, return to step 6.
11
Touch [OK].
The print position is adjusted.
11.7.4 Centering (Duplex 2nd Side)
The starting print position at the left edge of the paper for the second side during automatic double-sided
copying for each paper tray can be adjusted.
0 The starting print position is adjusted during manufacturing of the machine. Normally, the starting print
position will not need to be adjusted.
0 Only A4 v paper can be used to adjust the bypass tray.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator
Settings screen" on page 11-34 .
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [4 Centering (Duplex 2nd Side)].
The Centering (Duplex 2nd Side) screen appears.
c c: 4.2 mm