Konica Minolta bizhub C203 Series, User Manual

Page: 460 / 534

C353/C253/C203 11-25
Utility mode
11
* Appears when finisher is installed with the punch kit attached.
!
Detail
For the procedure on adjusting the printer, refer to
"Printer Adjustment" on page 11-40
.
For the procedure on adjusting the finisher, refer to "Finisher Adjustment" on page 11-48 .
For the procedure on adjusting the color registration, refer to
"Color Registration Adjust" on
page 11-56 .
For the procedure on adjusting the gradation levels, refer to
"Gradation Adjustment" on page 11-59
.
[Finisher Adjustment] appears only when optional finisher FS-609 is installed or finisher FS-519 is
installed with the saddle stitcher attached.
Only "Black Image Density" is available for OHP transparencies.
List/Counter
Reset Settings
Gradation
Adjustment Image Stabiliza-
tion Only When adjusting the gradation levels, first press
the [Start] key to perform image stabilization. -
Copy Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on increasing the
number of images stored in the memory. -
Printer (Gradation) Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on the gradations in
images. -
Printer (Resolu-
tion) Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on the reproducibility
of text and lines. -
Line Detec-
tion Prior Detection
Setting Select whether or not a warning appears when the left partition glass is dirty,
and specify the dirt detection level. The dirt detection operation is performed
before and after scanning an original using the ADF.
Detection While
Feeding Setting Specify the level at which dirt is detected when scanning an original using the
ADF. If "Do Not Remove" is selected, the operation to remove lines is not per-
formed.
Parameter Description Default Setting
Parameter Description
Management List Job Settings List The machine settings can be printed.
Paper Size/Type Counter Store combinations of paper sizes and paper types to be
counted.
Parameter Description Default Setting
System Auto Reset Specify the desired length of time until the auto-
matic system reset operation is performed.
•
Priority Mode:
Select the setting ("Copy" or "Scan/Fax") for
the mode that the machine enters when the
automatic system reset operation is per-
formed.
• System Auto Reset Time:
Specify the setting (between 1 minute and 9
minutes or "OFF") for the desired length of
time until the automatic system reset opera-
tion is performed.
Priority Mode:
Copy
System Auto Reset
Time: 1 Minute
Auto Reset Select the setting (between 1 minute and 9 min-
utes or "OFF") for the desired length of time until
the automatic panel reset operation is performed
for each mode (Copy and Scan/Fax). Copy: 1 Minute
Scan/Fax: 1 Minute