Konica Minolta bizhub C203 Series, User Manual

Page: 75 / 534

C353/C253/C203 2-6
Basic copy operations
2
2.3 Feeding the original
The original can be fed in either of the following two ways. Be sure to position the original correctly according
to the type of original being copied.
2.3.1 Loading the original into the ADF
0 The ADF is an option.
0 Do not load originals that are bound together, for example, with paper clips or staples.
0 For details on the types of originals that can be loaded into the ADF, refer to
"Originals" on page 6-19
.
0 Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the
▼
mark,
otherwise an original misfeed or damage to the original or machine may occur. However, a original that
exceeds 100 pages can be scanned in separate batches. For details, refer to
"Scanning the original
in separate batches ("Separate Scan" setting)" on page 2-8 .
0 If the original is not loaded correctly, it may not be fed in straight or an original misfeed or damage to
the original may occur.
0 If the original is loaded in any orientation other than with the top of the original toward the back of the
machine, be sure to select the original orientation. For details on selecting the original orientation, refer
to
"Selecting the original orientation (Original Direction settings)" on page 2-20 .
1
Slide the lateral guides to fit the size of the original.
2
Place the original in the original feed tray in the order to
be scanned with the side to be scanned faces up.
– Load the original pages so that the top of the original
is toward the back or the right side of the machine.
Original Feed Method Features
Using the ADF By using the ADF, a multi-page original can be fed automatically, one page at a
time. This feed method can also be used to automatically scan double-sided orig-
inals.
Using the original glass Place the original directly on the original glass so that it can be scanned. This
method is best with books and other originals that cannot be fed through the ADF.
A
A