Konica Minolta bizhub C203 Series, User Manual

Page: 28 / 534

C353/C253/C203 1-7
Before making copies
1
1.1.3 Inside of machine
36 Network connector
(10Base-T/100Base-
TX/1000Base-T) Used for connecting the network cable when this machine is used for network
printing and network scanning.
37 ADF connector Used for connecting the ADF hookup cord.
38 Finisher connector Used for connecting the finisher hookup cord.
39 Ozone filter Collects the ozone generated in the machine.
40 Power cord Supplies power to the machine.
No. Part name Description
4
2
6
5
7
16
10
1
3
11
9
8
13
12
15
14
No. Part name Description
1 Original glass The original placed on the glass is scanned.
2 Fusing unit upper cover Opened when cleaning paper misfeeds in the fusing unit.
3 Fusing cover lever M2 Opened when cleaning paper misfeeds in the fusing unit.
4 Upper right-side door Opened when clearing paper misfeeds from inside the main unit.
5 Unlock lever Used when removing an imaging unit.
6 Imaging unit Creates the print image.
7 Charger-cleaning tool Used to clean the electrostatic charger wire, for example, when incorrect cop-
ies are produced.
8 Print head glass cleaning
tool Used to clean the surface of the print head glass, for example, when replacing
the imaging unit.
9 Waste toner box Collects used waste toner.
10 Main power switch Used to turn the machine on and off.
11 Total counter Shows the total number of pages that have been printed.
12 Lock tub Used when removing the toner cartridge.
13 Toner cartridges There are four toner cartridges: cyan (C), magenta (M), yellow (Y) and black (K).
The combination of the four toners generates full-color images.
14 Left partition glass Used to scan the original image in this area when the ADF is used.
15 Original scales Position the original so that it is aligned with the scales. Also, use the scales to
measure the loaded original.