Konica Minolta bizhub C203 Series, User Manual

Page: 257 / 534

C353/C253/C203 6-2
Copy paper/originals
6
6 Copy paper/originals
6.1 Copy paper
Use paper that meets the following specifications.
6.1.1 Possible paper sizes
Non-standard-sized paper:
* Banner paper
Paper width: 210 mm to 297 mm
Paper length: 457.3 mm to 1,200 mm
Standard-sized paper:
*1
For thick paper 4, only A3 w , A4 v , 11 × 17 w and 8-1/2 × 11 v are available for printing.
*2
12 × 18 is equivalent to 304.8 mm × 457.2 mm, which is one size larger than A3.
*3
There are five Foolscap sizes: 220 × 330 mm w , 8-1/2 × 13 w , 8-1/4 × 13 w , 8-1/8 × 13-1/4 w , and 8 ×
13 w . Any one of these sizes can be selected. For details, contact your service representative.
*
Can be used when the optional punch kit is installed on the finisher.
Paper source Paper width Paper length
Bypass tray* 90.0 mm to 311.1 mm 139.7 mm to 1,200.0 mm
Tray 1 – –
Tray 2
Single/Double paper feed cabi-
nets
LCT
Double-sided copies 139.7 mm to 311.1 mm 148 mm to 457.2 mm
Paper source Paper size
Bypass tray
*1
A3 w to B6 w , A6 w
12 × 18 w
*2
to 5-1/2 × 8-1/2 w / v , 8 × 13 w
*3
, 16K w / v , 8K w
Tray 1 A3 w to A5 w , 11 × 17 w to 8-1/2 × 11 w / v , 8 × 13 w
*3
, 16K v , 8K w
Tray 2 A3 w to A5 w , 12 × 18 w
*2
to 8-1/2 × 11 w / v , 8 × 13 w
*3
, 16K v , 8K w
Single/Double paper feed cabi-
nets A3 w to A5 w , 11 × 17 w to 8-1/2 × 11 w / v , 8 × 13 w
*3
, 16K v , 8K w
LCT A4 v , 8-1/2 × 11 v
Double-sided copies A3 w to A5 w / v , 12-1/4 × 18 w , 12 × 18 w
*2
to 5-1/2 × 8-1/2, 8 × 13 w
*3
,
16K w / v , 8K w
Loaded equipment Paper sizes that can be loaded
Finisher FS-519 Output tray 1, 2 and optional Output Tray
A3
w to B6 w , A6 w , 12- 1/4 × 18 w
"Group"/"Sort settings": A3 w to A5 v
Staple settings: A3 w to A5 v
Punch settings*: A3 w , A4 v , B5 v
Optional Output Tray OT-602
Saddle Stitcher SD-505 Fold & staple: A3 w , B4 w , A4 w , B5 w
Mailbin Kit MT-502 A4 v , B5 v , A5 w
Finisher FS-609 Output tray 1:
"Group"/"Sort" setting: A3
w to B5 w / v , A3 Wide (12-1/4 × 18 w )
"Offset/Group" setting, "Offset/Sort" setting: A3 w to A5 v
"Offset/Sort/Staple" setting: A3 w to B5 w / v
Punch setting*: A3 w , A4 v
Output tray 2: A3 w to A4 w
Job separator JS-505 Finishing tray 1 and finishing tray 2
A3
w to B6 w , A6 w , 12- 1/4 × 18 w ,
11 × 17 w to 5-1/2 × 8-1/2 w / v