Konica Minolta bizhub C203 Series, User Manual

Page: 459 / 534

C353/C253/C203 11-24
Utility mode
11
Expert Adjustment
Parameter Description Default Setting
AE Level Adjustment Specify the initial value for auto exposure (AE) be-
tween 0 and 4. The higher the setting, the more
that the original background is emphasized. Standard (2)
Printer Ad-
justment Leading Edge
Adjustment Adjust the starting print position between -3.0 mm
and 3.0 mm at the leading edge of the paper (with
respect to the paper feed direction). Adjustments
can be specified for each paper type. 0.0 mm
Centering Adjust the starting print position between -3.0 mm
and 3.0 mm at the left edge of the paper (with re-
spect to the paper feed direction). Adjustments
can be specified for each paper tray. 0.0 mm
Leading Edge Ad-
justment (Duplex
Side 2) Adjust the starting print position between -3.0 mm
and 3.0 mm at the leading edge of the paper for
the second side during automatic double-sided
copying. Adjustments can be specified for each
paper tray. 0.0 mm
Centering (Duplex
2nd Side) Adjust the starting print position between -3.0 mm
and 3.0 mm at the left edge of the paper for the
second side during automatic double-sided cop-
ying. Adjustments can be specified for each paper
tray. 0.0 mm
Media Adjustment If the print image is flawed (missing print, white
spots, or uneven printing) due to the characteris-
tics of the type of paper that is used, adjust this
parameter between -8 and +7 according to the
paper type.
Finisher Ad-
justment Center Staple Po-
sition Adjust the stapling position when printing with the
"Center Staple & Fold" setting.
Finisher FS-519:-10 to 10
Finisher FS-609:-7 mm to 7 mm 0
0.0 mm
Half-Fold Position Adjust the folding position when printing with the
"Center Staple & Fold" setting.
Finisher FS-519:-10 to 10
Finisher FS-609:-7 mm to 7 mm 0
0.0 mm
Punch Horizontal
Position Adjust-
ment* Adjust the horizontal position of the punched
holes between -10 and 10. 0
Punch Regist Loop
Size Adjustment* Adjust the hole-punching shift for double-sided
printing and outputting cover pages between -4
and 4. 0
Density Ad-
justment Thick –Yellow Adjust the image density for printing on thick pa-
per or OHP transparencies. The density can be
adjusted separately for each color (yellow, ma-
genta, cyan and black for a color image and the
black image density). The higher the setting, the
darker the density.
Adjust the setting for yellow, magenta, cyan and
black between -5 and +5.
Adjust the setting for "Black Image Density" be-
tween -2 and +2. 0
Thick –Magenta 0
Thick –Cyan 0
Thick –Black 0
Black Image Den-
sity 0
Image Stabilization Perform an image stabilization if the image is in-
correct, even after the gradation levels have been
adjusted.
•
Image Stabilization Only:
Perform a normal image stabilization.
• Init Image Stabilization:
Select when a good result was not achieved
after "Image Stabilization Mode" was select-
ed.
Image Stabilization Only
Color Regis-
tration Ad-
just Color Registration
Adjust (Yellow) Adjust the color registration if color shifts can be
seen in the print result. -
Color Registration
Adjust (Magenta) -
Color Registration
Adjust (Cyan) -