Konica Minolta bizhub C203 Series, User Manual

Page: 79 / 534

C353/C253/C203 2-10
Basic copy operations
2
– If the "Separate Scan Output Method" parameter is set to "Batch Print", touch [Finish] in the
following screen, which appears while the original is scanned with the ADF, to continue to step 5.
– If the original cannot be loaded into the ADF, place it on the original glass. For details on the types
of originals that can be loaded into the ADF, refer to
"Originals" on page 6-19
.
– To change the scanning settings, touch [Change Setting]. For details on changing the scanning
settings, refer to
"Changing scan settings for each original" on page 2-25
.
– The buttons that appear in the screen for changing the settings differ depending on the specified
settings. Settings for the following can be changed.
1-Sided/2-Sided, Binding Position, Zoom, Frame Erase, Center Erase, Original Size
– To cancel changes to the settings, touch [Cancel].
– The amount of memory available can be checked beside "Memory" in the lower-left corner of the
screen.
To delete the image data, press the [Stop] key, and then delete the job. For details, refer to
"Temporarily stopping scanning/printing" on page 2-77 .
4
After all original pages have been scanned, touch [Finish].
5
Press the [Start] key.