Konica Minolta bizhub C203 Series, User Manual

Page: 449 / 534

C353/C253/C203 11-14
Utility mode
11
!
Detail
For details on the "Administrator Security Levels" parameter, refer to
"Security Settings" on
page 11-31 .
Output Settings
*
1
If optional separator is installed, "Tray 2" is selected as the factory default.
*
2
If optional separator is installed, "Tray 1" is selected as the factory default.
2
Note
The "Output Tray Settings" parameter is available only if the optional finisher FS-519 or separetor is
installed.
When an additional output tray is installed on finisher FS-519, the additional output tray is assigned as
Tray 2, and Tray 2 is assigned as Tray 3, in "Output Tray Setting".
[Bin Assignment] only appears if the optional mailbin kit is installed. on finisher FS-519
The "Bin Assignment" parameter is set to "Tray 2" only if the optional output tray is installed on finisher
FS-519.
AE Level Adjustment
Auto Paper Select for Small Original
Blank Page Print Settings
2
Note
[Output Settings], [AE Level Adjustment] and [Blank Page Print Settings] appear only if the
"Administrator Security Levels" parameter in Administrator mode is set to "Level 2".
Parameter Description Default Setting
Print/Fax Output Settings Specify settings for faxing and printing. For details, refer to the User’s Guide [Network
Scan/Fax/Network Fax Operations] and the User’s Guide [Print Operations].
Output Tray Setting Select the copy output tray for each
type of job (copies, printouts, re-
ports and faxes). Copy: Tray 1*
1
Print: Tray 1*
1
Print Reports: Tray 3*
2
Fax: Tray 3*
2
Bin Assignment Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6. Not Set
Description Default Setting
Specify the initial value for auto exposure. The higher the setting, the more that the orig-
inal background is emphasized. Standard (2)
Description Default Setting
Select whether copying is permitted when the "Auto" Paper setting is selected and ei-
ther no original is placed on the original glass or the original placed on the original glass
is too small for its size to be detected.
•
Copy on Small Size:
The original size is determined to be A5, and copies are produced on A5-size paper.
• Copy on A4:
The original size is determined to be A4, and copies are produced on A4-size paper.
• Prohibit Copy:
Copies cannot be produced since the original size cannot be detected. Before
pressing the [Start] key, the paper tray (paper to be printed on) must be selected.
Prohibit Copy
Description Default Setting
Select whether or not stamps and overlays are printed on blank pages. Do Not Print