Konica Minolta bizhub C203 Series, User Manual

Page: 141 / 534

C353/C253/C203 2-72
Basic copy operations
2
3
Specify the settings for binding pages.
– To staple copies at the center in two places, touch [Yes] below "Center Staple" and [No] below
"Half-Fold".
– To bind copies at the center, touch [Yes] below "Center Staple" and [Yes] below "Half-Fold".
– If a cover sheet is added with the "Cover Sheet" function, the cover sheet (60 g/m
2
to 209 g/m
2
) can
be stapled.
– When the "Center Staple" and "Half-Fold" setting is selected, the following factory default settings
are automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (70.7%) when the "Booklet" function is selected
– When the "Center Staple" and "Half-Fold" setting is selected, the following Finishing settings are
not available.
Group
Offset
Staple
Punch
– To cancel the "Center Staple" and "Half-Fold" setting, touch [No].
4
Touch [OK], and then touch [OK] again.
When Finisher FS-609 is installed
* The number of sheets that can be bound together differs depending on the paper weight.
64 g/m
2
paper: 15 sheets
80 g/m
2
paper: 10 sheets
!
Detail
In order for copies to be bound at the center, all of the following conditions must be met.
The paper width must be between 210 mm and 297 mm.
The paper length must be between 279 mm and 432 mm.
Paper Weight Paper Size Number of Bound Pages
60 g/m
2
to 90 g/m
2
A3 w , B4 w , A4 w 2 sheets to 15 sheets
*
Number of Bound Pages Maximum Number of Sets
2 sheets to 5 sheets 20 sets
6 sheets to 10 sheets 10 sets
11 sheets to 15 sheets* 10 sets