manualshive.com logo in svg

Konica Minolta bizhub C203 Series, User Manual

Share
Download
Konica Minolta bizhub C203 Series User Manual Download Page 387

C353/C253/C203

8-4

Replacing toner cartridges and staple cartridges and emptying punch scrap box

8

8.1.1

To replace the toner cartridge

The procedure for replacing any of the toner cartridges (yellow (Y), magenta (M), cyan (C) or black (K)) is the 
same.

Example: Replacing the black toner cartridge

2

Note 

Be careful about the installation location of the toner cartridges, since it is different for other colors.

The shape of the black toner cartridge is different from the shapes of the toner cartridges for the other 
colors.

1

Open the machine’s front door.

–

Check that a toner cartridge of the same color as the 
one to be replaced has been prepared.

2

Pull up the locking tab of the empty toner cartridge to 
unlock it. Pull out the toner cartridge as far as possible, 
and then pull it up to remove it.

?

How are used toner cartridges disposed of?

%

Do not throw away used toner cartridges. Instead, 
keep them in their boxes to be collected by your 
service representative.

3

Prepare the new toner cartridge.

–

Make sure that the toner cartridge is the same color as the label in the cartridge compartment.

?

Can a toner cartridge of a different color be installed?

%

The toner cartridge of a color different than the one that was removed cannot be installed. If the 
wrong toner cartridge is installed with extreme force, the machine may be damaged.

Summary of Contents for bizhub C203 Series























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands