manualshive.com logo in svg

Konica Minolta bizhub C203 Series, User Manual

Share
Download
Konica Minolta bizhub C203 Series User Manual Download Page 167

C353/C253/C203

3-20

Additional copy operations

3

The Touch Panel Adjustment. screen appears.

?

Why does the machine not respond when [Touch 
Panel Adjustment.] is touched?

The touch sensors are not aligned on the touch panel.

%

Press the [1] key in the keypad.

3

Touch the four check points [+], making sure that a sound is produced with each.

–

The check points [+] can be touched in any order.

–

To reset the adjustment, press the [C] (clear) key, and then touch the four check points [+].

If the check points have been touched correctly, the indicator on the [Start] key lights up in blue.

4

Press the [Start] key.

The touch panel is adjusted, and the Accessibility Setting screen appears again.

5

Touch [Close] or press the [Accessibility] key.

The Basic screen appears again.

2

Note 

If the touch panel cannot be adjusted, contact the service representative.

!

Detail 

To cancel the touch panel adjustment, press the [Stop] key or the [Reset] key.

3.7.3

Setting the Key Repeat Start/Interval Time functions

The length of time until the value begins to change after a touch panel button is held down and the length of 
time for the value to change to the next number can be specified.

0

The settings specified for the Key Repeat Start/Interval Time functions are only applied in the Enlarge 
Display mode.

1

Display the Accessibility Setting screen.

–

For details on displaying the Accessibility Setting screen, refer to 

"Displaying the Accessibility 

Setting screen" on page 3-19

.

Summary of Contents for bizhub C203 Series























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands