KIP 7170K, Service Manual

Page: 688 / 865

K134sm8e6 8-129
8. 4. 3.86 Compensation of Fuser Motor Speed for roll paper
(Special tracing paper / 30”) (No.460 to 465, 734, 735)
It is possible to compensate the Fuser Motor speed specifying each Fuser Motor 1st, 2nd, 3rd and
4th Speed.
It is also possible to specify when to switch the speed. (Switch timing)
These settings become effective when you use a tracing paper (special media) of 30” size
by roll paper feeding.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
460 Fuser Motor 1st Speed
(Roll / special tracing / 30”)
40 40 40 40 0 to 80 0.04mm/s
461 Switch Timing to Fuser Motor 1st Speed
(Roll / special tracing / 30”)
0 0 0 0 0 to 300 0.5 sec
462 Fuser Motor 2nd Speed
(Roll / special tracing / 30”)
40 40 40 40 0 to 80 0.04mm/s
463 Switch Timing to Fuser Motor 2nd Speed
(Roll / special tracing / 30”)
0 0 0 0 0 to 300 0.5 sec
464 Fuser Motor 3rd Speed
(Roll / special tracing / 30”)
40 40 40 40 0 to 80 0.04mm/s
465 Switch Timing to Fuser Motor 3rd Speed
(Roll / special tracing / 30”)
0 0 0 0 0 to 300 0.5 sec
734 Fuser Motor 4th Speed
(Roll / special tracing / 30”)
40 40 40 40 0 to 80 0.04mm/s
735 Switch Timing to Fuser Motor 4th Speed
(Roll / special tracing / 30”)
0 0 0 0 0 to 300 0.5 sec
You can specify the Fuser Motor 1st Speed, 2nd, 3rd, 4th in each Item No.460, 462, 464, 734.
If you increase the setting value by “+1”, each Fuser Motor Speed becomes 0.04mm/second faster.
You can specify the switch timing to each Fuser Motor 1st Speed, 2nd, 3rd, 4th in each Item
No.461, 463, 465, 735.
If you increase the setting value by “+1”, the timing to switch the speed is 0.5 second delayed.
For the detail information above, see [8. 4.5.37 Compensation of Fuser Motor Speed for roll
paper (Plain paper / A3, 12” & 11”) (No.070 to 075, 678, 679)].