KIP 7170K, Service Manual

Page: 628 / 865

K134sm8e5 8-69
8. 4. 3.17 Print - Fuser Temperature Center (No.039 to 044)
It is possible to adjust the center part of Fuser Temperature in a print cycle.
You can specify the temperature for each type of media separately.
The Fuser Temperature becomes 1 degree higher if you increase the setting value by “+1”.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
039 Print - Fuser Temperature Center
(Plain)
160 165 165 165 120 to 180 1
o
C
040 Print - Fuser Temperature Center
(Tracing)
160 170 160 155 120 to 180 1
o
C
041 Print - Fuser Temperature Center
(Film)
177 170 170 155 120 to 180 1
o
C
042 Print - Fuser Temperature Center
(Special media / Plain)
160 160 160 160 120 to 180 1
o
C
043 Print - Fuser Temperature Center
(Special media / Tracing)
160 160 160 160 120 to 180 1
o
C
044 Print - Fuser Temperature Center
(Special media / Film)
177 177 177 177 120 to 180 1
o
C
Setting value of 039 to 044
(Example: Film 170
o
C)
(
o
C)
0 (Time)
Turn on Ready Print Job
Reference
(1) The both sides part of Fuser Temperature will be controlled by Print - Fuser Temperature
Side (No. 625 to 648) separately.
(2) Item List of Fuser Temperature Control (center / side)
Fuser Center Fuser Sides
Print
(for printing period)
No.039 to 044 No.625 to 648
Ready
(target temperature to get “Ready”)
No.660 to 665 No.666 to 671
Standby
(during “standby”)
No.738 No.739
Warm Sleep No.046 (common to both Center / Side)