KIP 7170K, Service Manual

Page: 695 / 865

K134sm8e6 8-136
8. 4. 3.93 Compensation of Fuser Motor Speed for cut sheet
paper (Special film / 30”) (No.502 to 507)
It is possible to compensate the Fuser Motor speed specifying each Fuser Motor 1st, 2nd and 3rd
Speed.
It is also possible to specify when to switch the speed. (Switch timing)
These settings become effective when you use a film (special media) of 30” size by cut
sheet bypass feeding.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
502 Fuser Motor 1st Speed
(Cut sheet / special film / 30”)
40 40 40 40 0 to 80 0.04mm/s
503 Switch Timing to Fuser Motor 1st Speed
(Cut sheet / special film / 30”)
0 0 0 0 0 to 300 0.5 sec
504 Fuser Motor 2nd Speed
(Cut sheet / special film / 30”)
40 40 40 40 0 to 80 0.04mm/s
505 Switch Timing to Fuser Motor 2nd Speed
(Cut sheet / special film / 30”)
0 0 0 0 0 to 300 0.5 sec
506 Fuser Motor 3rd Speed
Cut sheet / special film / 30”)
40 40 40 40 0 to 80 0.04mm/s
507 Switch Timing to Fuser Motor 3rd Speed
(Cut sheet / special film / 30”)
0 0 0 0 0 to 300 0.5 sec
You can specify Fuser Motor 1st Speed, 2nd, 3rd in each Item No.502, 504 and 506.
If you increase the setting value by “+1”, each Fuser Motor Speed becomes 0.04mm/second faster.
You can specify the switch timing to each Fuser Motor 1st Speed, 2nd, 3rd in each Item No.503,
505 and 507.
If you increase the setting value by “+1”, the timing to switch the speed is 0.5 second delayed.
For the detail information above, see [8. 4.5.37 Compensation of Fuser Motor Speed for roll
paper (Plain paper / A3, 12” & 11”) (No.070 to 075, 678, 679)].