KIP 7170K, Service Manual

Page: 667 / 865

K134sm8e6 8-108
8. 4. 3.65 Compensation of Fuser Motor Speed for cut sheet paper
(Tracing paper / A3, A2, 12”, 11”, 18” & 17”) (No.334 to 339)
It is possible to compensate the Fuser Motor speed specifying each Fuser Motor 1st, 2nd and 3rd
Speed.
It is also possible to specify when to switch the speed. (Switch timing)
These settings become effective when you use a tracing paper of A2, 18” and 17” sizes by
cut sheet bypass feeding.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
334 Fuser Motor 1st Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
33 40 40 40 0 to 80 0.04mm/s
335 Switch Timing to Fuser Motor 1st Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
2 1 1 1 0 to 300 0.5 sec
336 Fuser Motor 2nd Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
38 44 44 44 0 to 80 0.04mm/s
337 Switch Timing to Fuser Motor 2nd Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
3 5 5 5 0 to 300 0.5 sec
338 Fuser Motor 3rd Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
38 45 45 45 0 to 80 0.04mm/s
339 Switch Timing to Fuser Motor 3rd Speed
(Cut sheet / Tracing / A3, A2, 12”, 11”, 18” & 17”)
5 2 2 2 0 to 300 0.5 sec
You can specify the Fuser Motor 1st Speed, 2nd, 3rd in each Item No.334, 336 and 338.
If you increase the setting value by “+1”, each Fuser Motor Speed becomes 0.04mm/second faster.
You can specify the switch timing to each Fuser Motor 1st Speed, 2nd, 3rd in each Item No.335,
337 and 339.
If you increase the setting value by “+1”, the timing to switch the speed is 0.5 second delayed.
For the detail information above, see [8. 4.5.37 Compensation of Fuser Motor Speed for roll
paper (Plain paper / A3, 12” & 11”) (No.070 to 075, 678, 679)].