KIP 7170K, Service Manual

Page: 616 / 865

K134sm8e4 8-57
8. 4. 3 Setting Item Explanation
Item No. starts with “4”. For example, KIP Service Software shows 4000, this section shows
“No.000”.
8. 4. 3. 1 Leading Registration (No. 000 & 001)
It is possible to specify where to start printing the image at the leading edge of the media.
If you increase the setting value by “+1 “, the head of image is shifted 1mm downward toward the
trailing edge As a result the leading margin becomes larger.
Item No. Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
000 Leading Registration (Roll paper) 19 19 19 19 5 to 40 1mm
001 Leading Registration (Cut sheet paper) 19 19 19 19 5 to 40 1mm
Leading Registration
value is increased. value is decreased.
8. 4. 3. 2 Trailing Margin (No. 002 & 003)
It is possible to adjust the length of trailing margin.
The length of trailing margin becomes 1mm shorter if you Increase the setting value by “+1 “.
Item No. Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
002 Trailing Margin (Roll paper) 9 9 9 9 5 to 40 1mm
003 Trailing Margin (Cut sheet paper) 10 10 10 10 5 to 40 1mm
Setting value is decreased. Setting value is increased.
Trailing Margin
NOTE
Some trailing image may be lost if you increase the value too much.