KIP 7170K, Service Manual

Page: 696 / 865

K134sm8e6 8-137
8. 4. 3.94 Transfer Voltage applied at 100mm from trailing edge
(Plain paper / Tracing paper / Film) (No.508 to 510)
It is possible to adjust the analog voltage to Transfer Corona on 100mm end of a print.
This section does not function and is reserved for future update.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/
ASIA
CN CND
508 Transfer Voltage applied at 100mm from trailing edge (Plain) 3FF 3FF 3FF 3FF 0 to 7FE Hexadecimal
509 Transfer Voltage applied at 100mm from trailing edge (Tracing) 3FF 3FF 3FF 3FF 0 to 7FE Hexadecimal
510 Transfer Voltage applied at 100mm from trailing edge (Film) 3FF 3FF 3FF 3FF 0 to 7FE Hexadecimal
8. 4. 3.95 Transfer Voltage applied at 70mm from trailing edge
(Plain paper / Tracing paper / Film) (No.511 to 513)
It is possible to adjust the analog voltage to Transfer Corona on 70mm end of a print.
A setting combination among No.511 to No.516 can reduce ghost images on the bottom area of a
print in some cases.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/
ASIA
CN CND
511 Transfer Voltage applied at 70mm from trailing edge (Plain) 4BC 4BC 4BC 4BC 0 to 7FE Hexadecimal
512 Transfer Voltage applied at 70mm from trailing edge (Tracing) 592 592 592 592 0 to 7FE Hexadecimal
513 Transfer Voltage applied at 70mm from trailing edge (Film) 3FF 3FF 3FF 3FF 0 to 7FE Hexadecimal
8. 4. 3.96 Fuser Motor Speed applied at 30mm from trailing edge
(Plain paper / Tracing paper / Film) (No.514 to 516)
It is possible to adjust the speed of Fuser Motor driving on 30mm end of a print.
A setting combination among No.511 to No.516 can reduce ghost images on the bottom area of a
print in some cases.
Item
No.
Setting Item Default value Setting
range
Step of
increment USA EUR/
ASIA
CN CND
514 Fuser Motor Speed applied at 30mm from trailing edge (Plain) 13 13 13 13 0 to 80 0.04mm/s
515 Fuser Motor Speed applied at 30mm from trailing edge (Tracing) 19 8 8 8 0 to 80 0.04mm/s
516 Fuser Motor Speed applied at 30mm from trailing edge (Film) 0 0 0 0 0 to 80 0.04mm/s