KIP 7170K, Service Manual

Page: 249 / 865

K134sm5e8 5-96
25. On the connector side, remove 1 screw (36) to release Bracket 10 Assy (37).
NOTE
(1) Do not touch the glass part of the Lamp with a bare hand.
(2) Do not interchange the IR Lamps (34) (35). One with red connectors (34) should be
installed to the media entrance side and the other with white connectors (35) to the media
exit side.
(3) There is a bubble (projection) on the glass part of IR Lamp.
If the bubbles of both IR Lamps touch each other, IR Lamps will be broken because of
vibration or heat.
Make sure not to face the bubbles each other. Install the IR Lamps so that the bubbles
will be located far from each other.
Correct Correct Wrong:
touching
(4) IR Lamps can be installed to Fuser Unit in either way.
cross section of bubble part
36
37
entrance exit entrance exit
34 34 35 35