KIP 7170K, Service Manual

Page: 639 / 865

K134sm8e6 8-80
8. 4. 3.37 Compensation of Fuser Motor Speed for roll paper
(Plain paper / A3, 12” & 11”) (No.070 to 075, 678, 679)
It is possible to compensate the Fuser Motor speed specifying each Fuser Motor 1st, 2nd, 3rd, 4th
Speed. It is also possible to specify when to switch the speed. (Switch timing)
These settings become effective when you use a plain paper of A3, 12” and 11” sizes by roll
paper feeding.
Item
No.
Setting Item Default value Setting
range
Step of
increment
USA EUR/ASIA CN CND
070 Fuser Motor 1st Speed
(Roll / Plain paper / A3, 12” & 11”)
34 39 39 39 0 to 80 0.04mm/s
071 Switch Timing to Fuser Motor 1st
Speed
(Roll / Plain paper / A3, 12” & 11”)
1 1 1 1 0 to 300 0.5 sec
072 Fuser Motor 2nd Speed
(Roll / Plain paper / A3, 12” & 11”)
35 42 42 42 0 to 80 0.04mm/s
073 Switch Timing to Fuser Motor 2nd
Speed
(Roll / Plain paper / A3, 12” & 11”)
1 1 1 1 0 to 300 0.5 sec
074 Fuser Motor 3rd Speed
(Roll / Plain paper / A3, 12” & 11”)
50 48 48 48 0 to 80 0.04mm/s
075 Switch Timing to Fuser Motor 3rd
Speed
(Roll / Plain paper / A3, 12” & 11”)
5 5 5 5 0 to 300 0.5 sec
678 Fuser Motor 4th Speed
(Roll / Plain paper / A3, 12” & 11”)
34 37 37 37 0 to 80 0.04mm/s
679 Switch Timing to Fuser Motor 4th
Speed
(Roll / Plain paper / A3, 12” & 11”)
6 8 8 8 0 to 300 0.5 sec
Please refer to the next page for further information.
NOTE
(1) Fuser Motor Speed is factory-adjusted based on an individual machine, and the result is
written in the service sheet. Be sure to confirm the service sheet in case of a setting
change on Fuser Motor Speed.
(2) Fuser Motor Speed should be changed with visual check. Remove the right cover and
see inside of the machine to check the feeding balance (media not to be pulled too much
/ without slack, etc).