Keysight Technologies InfiniiVision 3000T X Series, Programmer'S Manual

Page: 613 / 1420

:POWer Commands
26
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 613
:POWer:MODulation:TYPE
(see page 1276 )
Command Syntax
:POWer:MODulation:TYPE <modulation>
<modulation> ::= {VAVerage | ACRMs | VRATio | PERiod | FREQuency
| PWIDith | NWIDth | DUTYcycle | RISetime | FALLtime}
The :POWer:MODulation:TYPE command selects the type of measurement to
make in the modulation analysis:
• VAVerage
• ACRMs
• VRATio
• PERiod
• FREQuency
• PWIDth (positive pulse width)
• NWIDth (negative pulse width)
• DUTYcycle
• RISetime
• FALLtime
Query Syntax
:POWer:MODulation:TYPE?
The :POWer:MODulation:TYPE query returns the modulation type setting.
Return Format
<modulation><NL>
<modulation> ::= {VAV | ACRM | VRAT | PER | FREQ | PWID | NWID | DUTY
| RIS | FALL}
See Also • ":POWer:MODulation:SOURce" on page 612
• ":POWer:MODulation:APPLy" on page 611
• ":MEASure:VAVerage" on page 512
• ":MEASure:VRMS" on page 518
• ":MEASure:VRATio" on page 517
• ":MEASure:PERiod" on page 488
• ":MEASure:FREQuency" on page 480
• ":MEASure:PWIDth" on page 492
• ":MEASure:NWIDth" on page 484
• ":MEASure:DUTYcycle" on page 478
• ":MEASure:RISetime" on page 496
• ":MEASure:FALLtime" on page 479