392
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
18
:FUNCtion<m> Commands
•
MINHold — Operates on a single analog channel source or on a lower math
function. The Min Hold (or Min Envelope) operator records the minimum
vertical values found at each horizontal bucket across multiple analysis
cycles and uses those values to build a waveform.
•
TRENd — Measurement trend — Operates on a single analog channel source.
The TRENd:MEASurement command selects the measurement whose trend
you want to measure.
•
BTIMing — Chart logic bus timing — Operates on a bus made up of digital
channels. The BUS:YINcrement, BUS:YORigin, and BUS:YUNits commands
specify function values.
•
BSTate — Chart logic bus state — Operates on a bus made up of digital
channels. The BUS:YINcrement, BUS:YORigin, and BUS:YUNit commands
specify function values. The BUS:CLOCk and BUS:SLOPe commands specify
the clock source and edge.
Query Syntax
:FUNCtion<m>:OPERation?
The :FUNCtion<m>:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT | DIV | INT | DIFF | FFT | SQRT
| MAGN | ABS | SQU | LN | LOG | EXP | TEN | LOWP | HIGH | AVER
| SMO | ENV | LIN | MAXH | MINH | TREN | BTIM | BST}
See Also
•
"Introduction to :FUNCtion<m> Commands"
•
•
•
":FUNCtion<m>:INTegrate:IOFFset"
•
•
•
•
•
•
•
":FUNCtion<m>:FREQuency:LOWPass"
•
":FUNCtion<m>:FREQuency:HIGHpass"
•
•
":FUNCtion<m>:TRENd:MEASurement"
•
•
•
Summary of Contents for InfiniiVision 3000T X Series
