Keysight Technologies InfiniiVision 3000T X Series, Programmer'S Manual

Page: 252 / 1420

252 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
8
:BUS<n> Commands
:BUS<n>:LABel
(see page 1276 )
Command Syntax
:BUS<n>:LABel <quoted_string>
<quoted_string> ::= any series of 10 or less characters as a
quoted ASCII string.
<n> ::= An integer, 1 or 2, is attached as a suffix to BUS
and defines the bus that is affected by the command.
The :BUS<n>:LABel command sets the bus label to the quoted string. Setting a
label for a bus will also result in the name being added to the label list.
Query Syntax
:BUS<n>:LABel?
The :BUS<n>:LABel? query returns the name of the specified bus.
Return Format
<quoted_string><NL>
<quoted_string> ::= any series of 10 or less characters as a
quoted ASCII string.
See Also • "Introduction to :BUS<n> Commands" on page 246
• ":BUS<n>:BIT<m>" on page 247
• ":BUS<n>:BITS" on page 248
• ":BUS<n>:CLEar" on page 250
• ":BUS<n>:DISPlay" on page 251
• ":BUS<n>:MASK" on page 253
• ":CHANnel<n>:LABel" on page 273
• ":DISPlay:LABList" on page 328
• ":DIGital<d>:LABel" on page 310
Example Code
' Set the bus 1 label to "Data":
myScope.WriteString ":BUS1:LABel 'Data'"
NOTE
This command is only valid for the MSO models.
NOTE
Label strings are 10 characters or less, and may contain any commonly used ASCII characters.
Labels with more than 10 characters are truncated to 10 characters.