Keysight Technologies B1507A, User Manual

Page: 45 / 190

Keysight B1507A User’s Guide, Edition 1 1- 19
Introduction
Software
Program for converting the 4155/4156 measurement setup files (file extension
MES or DAT) into EasyEXPERT classic test setup files. This program is stored
in the following folder.
<program folder>\Agilent\B1500\EasyEXPERT\415xC\Conversion\
• MDM file converter
Program for converting EasyEXPERT data files (file extension XTR or ZTR)
into Keysight IC-CAP MDM files. This program is stored in the following
folder.
<program folder>\Agilent\B1500\EasyEXPERT\IC-CAP Support\MDM\
• Prober control programs
Execution files for controlling the probers listed below. The files are stored in
the following folder.
<program folder>\Agilent\B1500\EasyEXPERT\Utilities\
Probers supported:
• Cascade Microtech Summit 12K or S300
• SUSS MicroTec PA200 or PA300
• Vector Semiconductor VX-2000 or VX-3000
• sleep.exe program
Execution file for inserting a wait time in the test execution flow of an
EasyEXPERT application test. This file is stored in the following folder.
<program folder>\Agilent\B1500\EasyEXPERT\Utilities\
NOTE Notations
<program folder> is as follows. Then, <system drive> is the drive the B1507A
control software has been installed.
For Windows 7 64 bit version, <system drive>:\Program Files (x86)
For Windows 7 32 bit version, Vista, or XP, <system drive>:\Program Files