Keysight Technologies B1507A, User Manual

Page: 83 / 190

Keysight B1507A User’s Guide, Edition 1 3- 5
How To Perform Measurement
How To Perform Capacitance Measurement
Executing Measurement
NOTE This section explains the procedure using an example that selects MOSFET as a
device type of DUT and Ciss, Coss, Crss as a measurement item.
Execute a measurement as follows:
Step 1. On the software palette, click the Capacitance Measurement icon . The
Capacitance Measurement software (Figure 3-1) opens.
Step 2. At the Setup area in work area, select a device type of your DUT and a measurement
item to be measured.
• Device Type
Select a device type from the Device Type drop-down list.
NOTE
This example selects MOSFET.
• Measurement Item
From the radio buttons located on the right of a Device Type selection, which is
MOSFET in this example, select a measurement item to be measured.
NOTE
This example selects Ciss, Coss, Crss.
NOTE
For information on the available device types and measurement items, see Table 3-1
on page 3-8
By selecting a device type and measurement item, the setup items displayed in
the Setup area are automatically switched.