Keysight Technologies B1507A, User Manual

Page: 84 / 190

3- 6 Keysight B1507A User’s Guide, Edition 1
How To Perform Measurement
How To Perform Capacitance Measurement
Step 3. Enter the measurement frequency in the Frequency of General settings located at the
left part of Setup area.
By clicking the
Details
chevron, the area expands to set more detail conditions.
For more information on setting items, see “Setup” on page 4-11.
Step 4. Enter the bias voltage value in the Bias of Base/Gate Voltage Bias at the center of
Setup area.
Step 5. Enter or select the voltage sweep conditions in the Collector/Drain Voltage Sweep at
the right of Setup area.
Start Enter a start voltage value of sweep.
Stop Enter a stop voltage value of sweep.
Sweep Mode Select a sweep mode.
LinearSingle One-way linear sweep from the Start to the
Stop.
LogSingle One-way logarithmic sweep from the Start
to the Stop.
LinearDouble Linear-sweep from the Start to the Stop and
then return linear-sweep from the Stop to
the Start.
LogDouble Logarithmic-sweep from the Start to the
Stop and then return logarithmic-sweep
from the Stop to the Start.
By clicking the
Details
chevron, the area expands to set more detail conditions.