Keysight Technologies B1507A, User Manual

Page: 187 / 190

Keysight B1507A User’s Guide, Edition 1 4- 79
GUI Reference
Common GUI Components
Table 4-7 Configuration and Status
Operation Buttons You can do the following operations using the buttons below.
• Resetting the hardware modules
• Executing the self-test
• Executing the self-calibration
• Executing the self-diagnostics
Reset button Initializes and re-acknowledges all the modules.
Self Test button Executes the self-test for all the modules.
Self Calibration
button
Executes the self-calibration for all the modules.
Diagnosis button Executes the self-diagnostics for all the output selectors.
Connect the output terminals according to the displayed
instructions during the diagnostics execution.
Configuration Status
GNDU : B1500-66505 • Pass
It is passed.
• Fail
It is failed in the self-test or
self-calibration.
• Unavailable
It is not acknowledged.
MPSMU (SMU1) : B1511B
MFCMU : B1520A
HVSMU (SMU2) : B1513C
Device Capacitance Selector • Pass
It is passed.
• Fail
It is failed in the self-diagnostics.
• Unavailable
a
It is not acknowledged.
a. This also occurs when it is turned off.