Keysight B1507A User’s Guide, Edition 1
4- 45
GUI Reference
I/V Measurement Software
•
Stop
Specify the last step value.
Available for the “LinearSingle” Step Mode.
The following parameters can be shown or hidden by clicking the chevron
of the
Details.
•
Resource/Output Mode/Output Sequence
You can change the settings of this terminal using the pull-down menu. For
details, see “Resource/Output Mode/Output Sequence” on page 4-50.
•
Number of Step
Specify the number of steps.
Available for the “LinearSingle” Step Mode.
•
List
Create the list of the output levels.
Available for the “ListSingle” Step Mode.
To insert a new step entry before the selected step value, click the Insert
button
.
To move the selected step value up/down, click the Move button
.
To delete the selected step value, click the Delete button
.
•
Compliance
Specify a current/voltage compliance value.
If the output exceeds this, the sweep measurement is terminated.
•
Power Compliance
Specify the power compliance value.
To enable this, mark the check box.
If the output exceeds this, the sweep measurement is terminated.
Not available for HVSMU.
•
Voltage Compliance
Specify a voltage compliance value for UHCU.
To enable this, mark the check box.
If the output exceeds this, the sweep measurement is terminated.
Available for UHCU.
Pulse Step
The terminal outputs the voltage or current pulse that the peak level is changed
every time a sweep measurement is finished.
Summary of Contents for B1507A
