Keysight Technologies B1507A, User Manual

Page: 158 / 190

4- 50 Keysight B1507A User’s Guide, Edition 1
GUI Reference
I/V Measurement Software
Resource/Output
Mode/Output
Sequence
Depending on the selected characteristics measurement, the pre-defined output
mode and sequence are automatically selected. If necessary, you can change the
measurement resource, the output mode, and the output sequence. Table 4-3 shows
the available alternatives for the gate/base terminal, and Table 4-4 shows the
available alternatives for the drain/collector terminal.
Table 4-3 Available Resource/Output Mode/Output Sequence for Gate/Base Terminal
Measurement Resource Output Mode Output Sequence
• MPSMU
MPSMU is
connected to this
terminal.
• V
Specifies the DC
voltage output.
• VPulse
Specifies the pulse
voltage output.
• I
Specifies the DC
current output.
• IPulse
Specifies the pulse
current output.
• Constant
Specifies the
constant bias output
sequence.
• Step
Specifies the step
bias output sequence.
• Sweep
Specifies the sweep
output sequence.