Keysight Technologies B1507A, User Manual

Page: 89 / 190

Keysight B1507A User’s Guide, Edition 1 3- 11
How To Perform Measurement
How To Perform I/V Measurement
Executing Measurement
NOTE This section explains the procedure using an example that selects MOSFET as a
device type of DUT and ID-VDS as a measurement item.
Execute a measurement as follows:
Step 1. On the software palette, click the I/V Measurement icon . The I/V Measurement
software (Figure 3-2) opens.
Step 2. At the Setup area in work area, select a device type and measurement item to be
measured.
• Device Type
From the Device Type drop-down list, select a device type.
NOTE This example selects MOSFET.
• Measurement Item
From the radio buttons located on the right of a Device Type selection, which is
MOSFET in this example, select a measurement item to be measured.
NOTE This example selects ID-VDS.
NOTE For information on the available device types and measurement items, see Table 3-2
on page 3-17
By selecting a device type and measurement item, the setup items displayed in the
Setup area are automatically switched.