4- 78
Keysight B1507A User’s Guide, Edition 1
GUI Reference
Common GUI Components
Common GUI Components
This section describes the following GUI components commonly used in the
Keysight Easy Test Navigator software.
•
“Module Configuration Dialog Box” on page 4-78
Module Configuration Dialog Box
You can do the following operations in the Module Configuration dialog box.
•
Checking the revision of the firmware
•
Setting the power line cycle
•
Checking the status of the hardware modules
•
Resetting the hardware modules
•
Executing the self-test
•
Executing the self-calibration
•
Executing the self-diagnostics
This dialog box is opened by selecting the main menu Configuration > Module....
Firmware Revision
Shows the revision of the firmware.
Line Frequency
Select the power line frequency from below. This is used as the PLC value for the
measurement time setting.
•
50 Hz
•
60 Hz
Module Status
Shows the module’s model numbers and the result of the self-test, self-calibration,
and self-diagnostics for the modules as the status.
The following tables shows the configuration and status.
Summary of Contents for B1507A
