Keysight Technologies B1507A, User Manual

Page: 152 / 190

4- 44 Keysight B1507A User’s Guide, Edition 1
GUI Reference
I/V Measurement Software
Specify a pulse peak voltage/current value.
The following parameters can be shown or hidden by clicking the chevron of the
Details.
• Resource/Output Mode/Output Sequence
You can change the settings of this terminal using the pull-down menu. For
details, see “Resource/Output Mode/Output Sequence” on page 4-50.
• Base
Specify a pulse base voltage/current value.
• Compliance
Specify a current/voltage compliance value.

If the output exceeds this, the sweep measurement is terminated.
• Voltage Compliance
Specify a voltage compliance value for UHCU.

To enable this, mark the check box.

If the output exceeds this, the sweep measurement is terminated.

Available for UHCU.
• Peak Delay
Specify a delay time from the beginning point of the pulse period to the raising
point.
• Peak Width
Specify a period of the pulse peak.
Step
The terminal outputs the constant voltage or current that the level is changed every
time a sweep measurement is finished.
Set the following parameters.
• Step Mode
Select one from the following level change operation.
• LinearSingle: Constant level is changed by a constant step value.
• ListSingle: Constant level is changed according to the listed levels.
• Start
Specify the first step value.

Available for the “LinearSingle” Step Mode.