Kenwood NX-5800, Common Function Reference

Page: 58 / 476

0
If the data is written to the transceiver and the transceiver’s password is configured
1
Turn the Transceiver ON.
A Power-on Tone A (1 beep) sounds from the transceiver, and then an
animated logo appears for 500 ms.
If
Custom Start-up Screen is configured, a Power-on Tone A (1 beep)
sounds from the transceiver when the transceiver is turned ON and the
bitmapped image configured for the transceiver appears for 2 sec. (Refer
to
Displaying a Bitmap Image When the Transceiver is Turned ON (Custom
Start-up Screen) .)
“Password” appears after “SELF TESTING” appears. (Refer to Password
for Transceiver Operation (Transceiver Password) .)
Note
0
The animated logo appears only if Custom-Start-up Screen is not
configured.
0
In the following cases, if the transceiver is turned ON, the transceiver
enters Transceiver Password Mode:
0
If Transceiver Password is configured, “Transceiver Password”
is not assigned to any of the PF keys, and “Transceiver Password”
is not configured in Menu Mode
0
When “Transceiver Password” is assigned to one of the PF keys,
or when “Transceiver Password” is configured for Menu Mode, if
the transceiver is turned OFF while the transceiver is in
Transceiver Password Mode
2
Enter a password.
Refer to “ Entering or Deleting a Code ” for entry methods.
When the correct password is entered, a Password Authorization Tone (2
beeps) sounds from the transceiver, and then the password protection of
the transceiver is disabled.
If
Power-on Text is configured, the Power-on Text appears for 2 sec.
(Refer to Power-on Text .)
The transceiver enters User Mode, and then the channel name appears.
12 : 34
A
M
Password
Input Password
12 : 34 A
M
Password
0123
Delete Confrm
Menu Zone+
Zone 1
Channel 1
12 : 34 A
M
3 BASIC OPERATIONS
3.1 Turning the Transceiver ON/ OFF
Common FUNC (K, F)/Ver 2.20 27
CONTENTS INDEX