Warning Tone
Warning Tone is a tone that sounds from the transceiver before or when the transceiver is disabled to transmit, when the
transceiver becomes unable to transmit, or when the transceiver attempts to transmit while the transceiver is unable to
transmit.
The volume level of Warning Tone can be configured using KPG-D1/ D1N. (Refer to
Configuring the Volume Level of Various
Table 6-4 Warning Tone
Function
Description
Warning Tone A
This tone sounds from the transceiver while an unprogrammed channel is selected.
This tone sounds from the transceiver until the
PTT
switch is released if the transmission is
terminated by the
Time-out Timer
, or if the transceiver cannot transmit.
This tone sounds from the transceiver until the
PTT
switch is released if Busy Channel
Lockout is activated in an Analog Conventional, P25 Conventional and NXDN Conventional
system.
Warning Tone B
This tone sounds from the transceiver when the VOX transmission is terminated by
Time-
out Timer
.
Warning Tone C
This tone sounds from the transceiver when the automatic transmission is terminated by
Time-out Timer
.
Battery Warning Tone
(Portable only)
This tone sounds from the transceiver when the Battery voltage level drops to the adjusted
reduced-voltage level. (Refer to
Warning that the Battery Voltage Is Low (Battery
TOT Pre-alert Tone
This tone sounds from the transceiver when the transmit inhibit period configured in
Time-
out Timer
is about to expire.
PLL Unlock Tone
This tone sounds from the transceiver when PLL is unlocked.
Busy Tone
This tone sounds from the transceiver if data cannot be sent by pressing the
PTT
switch
since the channel is busy.
Busy Tone 2
This tone sounds from the transceiver if data communication is disabled since the channel
is busy.
This tone sounds from the transceiver when the transceiver receives a response message
from the system that notifies of the busy state of the receiving transceiver in an NXDN
Trunking system.
Timed Power-off Pre-alert
Tone A (Mobile only)
This tone sounds from the transceiver 1 min before the time preconfigured in
Timed Power-
off
.
Timed Power-off Pre-alert
Tone B (Mobile only)
This tone sounds from the transceiver 10 sec before the time preconfigured in
Timed
Power-off
.
Timed Power-off Pre-alert
Tone C (Mobile only)
This tone sounds from the transceiver 2 sec before the time preconfigured in
Timed Power-
off
.
Call Queue Tone
This tone sounds from the transceiver when the transceiver receives a response message
from the system that indicates a queued state in an NXDN Trunking system or P25 Trunking
system.
System Busy Tone
This tone sounds from the transceiver when the transceiver receives a response message
from the system indicating that no traffic channel is available in an NXDN Trunking system.
System Search Tone
This tone sounds from the transceiver when the transceiver initiates System Search and
changes the system in an LTR Trunking system.
System Search End Tone
This tone sounds from the transceiver when there is no repeater that can connect by using
System Search in an LTR Trunking system.
System Select Tone
This tone sounds from the transceiver when the transceiver finds an available system by
using System Auto Select and registration is successful in an NXDN Trunking system.
This tone sounds from the transceiver when the transceiver searches for the repeaters that can
be synchronized and a synchronized Personality is found in a DMR Conventional system.
Call Invalid Tone
This tone sounds from the transceiver when the transceiver receives from the system a
response message, such as a response message that service is disabled, in an NXDN
Trunking system or P25 Trunking system.
Invalid Dial Tone
While sending a Telephone Call in a P25 Trunking system, this tone sounds from the
transceiver when the transceiver receives from the system a response message that service
is disabled (Reason Code: $40 or $42).
6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed
Common FUNC (K, F)/Ver 2.20
109
