3.2
Adjusting the Volume Level
Portable
Rotating the
Volume
control clockwise increases the volume level from the speaker, and rotating the
Volume
control
counterclockwise decreases the volume level from the speaker.
Mobile
Pressing the
Volume Up
key increases the volume level in steps of 1. Pressing the
Volume Down
key decreases the
volume level in steps of 1. KCH-20R (Featured Panel) is operated by using the Volume control just as Portable.
If “Volume Up (Continuous)” or “Volume Down (Continuous)” is assigned to the
Volume Up
or
Volume Down
key, the
volume level is increased or decreased continuously every 100 ms by pressing and holding the
Volume Up
or
Volume
Down
key.
3.3
Using Function Keys
The following functions can be assigned to each key of the transceiver using KPG-D1/ D1N. Pressing a key to which a
function is assigned can activate the assigned function or place the transceiver in various Function Modes. (Refer to
Available Functions for the PF Keys
Following are the configuration examples for each key of the transceiver.
Table 3-2 Configuration Examples for Keys
Key
Function
2nd Function
Hold
Hold Delay
Home
(
[
T
]
)
Home Channel
None
Home Channel Select
3.0
Back
(
[
O
]
)
Key Lock
Autodial
None
1.0
AUX
Function
None
None
1.0
A function can be assigned to Function, 2nd Function and Hold of each key on the transceiver.
0
Function
The function is activated by pressing a key.
In the configuration example above, pressing the
Home
(
[
T
]
),
Back
(
[
O
]
), or
AUX
key activates the function assigned
to each key.
If a key to which Function is assigned is pressed, the transceiver waits for a function assigned to 2nd Function to be
activated.
0
2nd Function
The function is activated by pressing a key to which the function is assigned to 2nd Function after the
Function
key is
pressed.
In the configuration example above, pressing the
Back
(
[
O
]
) key after the
AUX
key is pressed activates the Autodial
function.
0
Hold
The function is activated by pressing and holding a key for the length of time configured for Hold Delay.
In the configuration example above, pressing and holding the
Home
(
[
T
]
) key for 3 sec activates the Home Channel
Select function.
Note
The two functions, Primary and Secondary, can be assigned to each key on the transceiver. Which function is used can
be configured for each zone or channel.
Configuration using KPG-D1/ D1N
Assigning functions to the
PF
keys on the transceiver (
Transceiver Settings > Key Assignment)
3 BASIC OPERATIONS
3.2 Adjusting the Volume Level
Common FUNC (K, F)/Ver 2.20
29
