0
If Auto Recording does not start because a file having the same file name exists
“SD Card Error” appears on the display for 1 sec.
Menu
Zone+
Individual
TRUCK 824
12 : 34
A
M
SD Card Error
If the audio is recorded to a microSD card,
Auto Recording
does not start if a file having the same file name exists in the
AR folder.
Note
0
If one of the following occurs during the recording, the timer for
Maximum Recording Length
stops and the recording
ends:
0
The Gap timer elapses (the recording continues for 3 sec from when the transmission or reception completes. This
duration of time is called the Gap timer.)
0
The channel or site is changed
0
Scanning starts or stops
0
The transceiver enters Emergency Mode
0
The data transmission starts
0
The
PTT
switch is pressed while
Public Address
is enabled (Mobile only)
0
The
PTT
switch is pressed while
Intercom
is enabled (only for a Dual Control Head structure of Mobile)
0
The
Clear
key is pressed and the communication ends
0
The DTMF code and “#” code are received, and the matching state of Optional Signaling is reset
0
While
Priority Scan
or
Priority Monitor Scan
is activated, the transceiver behaves as follows:
0
Regardless of the configuration in
Recording Type
, the muted sound is recorded while
Lookback
is activated.
0
If “All TX/RX Audio” is configured in
Recording Type
, and if a signal of a Priority Channel is received while the received
audio of a Normal Channel (which is not the Priority Channel) is recorded, the recording continues and the received
audio of the Priority Channel is recorded.
0
If “Individual Call” is configured in
Recording Type
, and if a signal of a Priority Channel is received while the received
audio of a Normal Channel is recorded, the recording of the Normal Channel ends, and then recording of the Priority
Channel starts.
0
During transmission, the audio is recorded via the Mic Line or MI2 Line.
0
The recorded audio can be played back or deleted in Playback Mode. (Refer to
Playing Back the Recorded Audio
0
When transmitting data,
Auto Recording
does not start.
0
Although a Transmit Tone is recorded, a Control Tone and Side Tone are not recorded.
0
If “All TX/RX Audio” is configured in
Recording Type
, the ID information is not stored when
Auto Recording
is started.
0
After the configuration data is written, the configuration values in Internal Memory of
Maximum Recording Length
before
and after writing are compared for each RF Deck. If the configurations differ, the audio data recorded in the internal
memory is deleted.
0
If the configuration data with
Audio/GPS Data Erase (Internal Memory)
enabled is written, the audio data recorded in
the internal memory is deleted.
0
If
Auto Recording
is used with other functions such as GPS Data Storage, the beginning may be missing from the audio
recorded by
Auto Recording
.
9 STORING RECORDED AUDIO/ GPS DATA
9.2 Recording Received Audio Automatically (Auto Recording)
Common FUNC (K, F)/Ver 2.20
162
