KCH-20R (Featured Panel)
1
8
9
2
3
h
g
e
d
c
b
a
f
5
6
7
4
0
Figure 1-3 NX-5700/ NX-5800 Front View (KCH-20R (Featured Panel))
A
[
P
] (Power) Switch
The transceiver is turned ON when this switch is pressed
and the transceiver is turned OFF when this switch is
pressed again. In this manual, the
[
P
]
(Power) switch is
described as the
Power
switch.
B
[+]/ [-] Key
The preassigned function will be activated or will be
changed to the active state.
C
LCD
The channel number and the transceiver’s status appear
on this display.
D
[
E
]/ [
F
] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
E
[
G
]/ [
H
] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
F
[A]/ [B]/ [C] Key
The preassigned function will be activated or will be
changed to the active state.
G
AUX Key
The preassigned function will be activated or will be
changed to the active state.
H
Illumination Sensor
The sensor is for automatically adjusting the luminance
of the LCD depending on the brightness of the
environment.
I
Transmit LED
This LED lights when the transceiver transmits a signal.
J
Busy/ Status LED
This LED lights or flashes according to the status, such
as while the transceiver is receiving a signal, and when
the transceiver receives a call.
K
[
T
] (Home) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
T
]
(Home) key is described as the
Home
(
[
T
]
) key.
L
[
Q
] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
Q
]
(Menu) key is described as the
Menu
(
[
Q
]
) key.
The default of the
[
Q
]
(Menu) key is the Menu function.
If the configuration is changed using KPG-D1/ D1N, a
newly configured function will be activated. Unless the
Menu function is reassigned to the
[
Q
]
(Menu) key, Menu
Mode cannot be activated even if the
[
Q
]
(Menu) key is
pressed.
M
[
O
] (Back) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
O
]
(Back) key is described as the
Back
(
[
O
]
) key.
N
[
d
]/ [
c
] Key
The preassigned function will be activated or will be
changed to the active state.
1 FUNCTIONS AND PANEL LAYOUT
1.2 NX-5700/ NX-5800/ NX-5900
Common FUNC (K, F)/Ver 2.20
4
