Kenwood NX-5800 Common Function Reference Download Page 180

Page: 180 / 476

7.7

Checking the Detailed Information of a Battery (Battery
Information Display)

Supported Models: Portable

Battery Information Display

is the function for checking the detailed information of an Intelligent Battery. The information

of an Intelligent Battery, such as the battery consumption level and the performance temperature, can be checked.
By pressing the

Menu

key to enter Menu Mode, and then executing “Battery Information Display”, Battery Information Display

Mode is entered. (Refer to

Using Menu Mode

In Battery Information Display Mode, the following battery information is displayed:

Table 7-6 Battery Information Display Mode

Item

Appearance

of the Display

Display Range

Description

Current Charge

Charge

0 % to 100 %

Indicates the charge status of an Intelligent Battery.

Cycle Count

Count

0 to 65535

Indicates the number of charges and discharges of an Intelligent

Battery.

Battery Health

Health

0 % to 100 %

Indicates the degradation status of an Intelligent Battery.

Current Voltage Voltage

0 V to 12.00 V

Indicates the voltage value of an Intelligent Battery.

Temperature

Temp.

Celsius:
-60.0 ºC to 100.0 ºC
Fahrenheit:
-76.0 ºF to 212.0 ºF

Indicates the temperature of an Intelligent Battery.

Chemistry

Chem.

Li-ion, Ni-MH

Indicates the type of an Intelligent Battery.

Serial Number

Serial

10-digit

alphanumeric

character

Indicates the serial number of an Intelligent Battery.

Model Name

Model

KNB-L1, KNB-L2,

KNB-L3, KNB-N4

Indicates the model name of an Intelligent Battery.

Date of First Use 1st Used

Year/ Month/ Day

Indicates the date of first use of an Intelligent Battery. The order of

the year, month and day depends on the configuration of Date

Format.
* If the values are not entered on the Battery Reader such as

KAS-12, “--/--/--” is displayed.

Battery Alias

Alias

20 alphanumeric

characters and

symbols

Indicates the arbitrary string of text entered on the Battery Reader

such as KAS-12.
* Only ASCII codes 0x20 - 0x7E are enabled. A character code

other than these ASCII codes will be replaced with one or more

spaces.

Pressing the

[

]

key can change the display in the following order:

Charge, Count, Health Display

Voltage, Temp., Chem. Display

Serial, Model, 1st Used Display

Alias Display

Charge, Count, Health Display

...

Pressing the

[

]

key can change the display in the following order:

Charge, Count, Health Display

Alias Display

Serial, Model, 1st Used Display

Voltage, Temp., Chem. Display

Charge, Count, Health Display

...

Note

“---” remains on the display if the information of an Intelligent Battery cannot be acquired such as when the transceiver

is turned ON while the transceiver is connected to the battery charger or when the battery other than an Intelligent Battery

is used.

Battery Information is not updated while the transceiver is in Battery Information Display Mode.

Since KNB-N4 does not support

Battery Alias

and

Date of First Use

, “---” remains for these items even if reading is

completed properly.

7 BATTERY

7.7 Checking the Detailed Information of a Battery (Battery Information Display)

Common FUNC (K, F)/Ver 2.20

149

CONTENTS

INDEX

Summary of Contents for NX-5800





























































































































































































































































































































































































































































































Search results

Summary of Contents for NX-5800

Reviews:

Related manuals for NX-5800

Brands by name

Popular brands

Kenwood NX-5800, Common Function Reference

Search results

Summary of Contents for NX-5800

Reviews:

Related manuals for NX-5800

Brands by name

Popular brands