manualshive.com logo in svg

Kenwood NX-5800, Common Function Reference

The Kenwood NX-5800 is a high-performance radio communication device designed for seamless connectivity. This user manual provides a comprehensive Common Function Reference guide, enabling users to make the most of their device's features. Download this detailed manual for free from manualshive.com to unlock the full potential of your Kenwood NX-5800.

Share
Download
background image

0

DMR system

Function Name

Radio Feature License

DMR Conventional

KWD-5300CV

0

Common

Function Name

Radio Feature License

4000 Channel

KWD-5000CH

Front Panel Programming

KWD-5001FP

microSD

KWD-5002SD

Bluetooth Serial Port Profile

KWD-5003BT

Multi RF Deck 

*1

KWD-5004MR

Remote Control

KWD-5007RC

*1

Implemented before the factory shipment.

IMPORTANT NOTICE:
THOSE WHO INTEND TO EXPORT OR RE-EXPORT OR TRANSPORT ANY COMPUTER(S) AND/OR ANY KINDS
OF PERIPHERAL DEVICE(S) WITH AES/DES ENCRYPTION SOFTWARE INSTALLED (INCLUDING
TRANSCEIVERS WITH ANY SOFTWARE FOR AES/DES ENCRYPTION) OUTSIDE OF A COUNTRY OR REGION
WITH SUCH CONTROLS OR RESTRICTIONS MUST FULLY COMPLY WITH ANY EXPORT AND IMPORT LAWS
AND REGULATIONS OF THE COUNTRY OR REGION AND OBTAIN ALL REQUIRED AUTHORIZATIONS OR
LICENSES IN ADVANCE.

How to Read the In-depth Manual

The In-depth Manual has the following sections.

Common Function Reference (Common FUNC)

Describes the functions common to the transceivers.

Analog Function Reference (Analog FUNC)

Describes the analog functions of the transceiver.

P25 Function Reference (P25 FUNC)

Describes the P25 functions of the transceiver.

NXDN Function Reference (NXDN FUNC)

Describes the NXDN functions of the transceiver.

DMR Function Reference (DMR FUNC)

Describes the DMR functions of the transceiver.

5-tone Function Reference (5-tone FUNC)

Describes the 5-tone functions of the transceiver.

　

About This Manual

Common FUNC (K, F)/Ver 2.20

ix

CONTENTS

INDEX

Summary of Contents for NX-5800





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NX-5800

Fanvil i10 Quick Start Manual preview
i10
Brand: Fanvil Pages: 6
Power Acoustik XP2K-60C Installation Manual preview
XP2K-60C
Brand: Power Acoustik Pages: 5
AVGO CM1551 Owner'S Manual preview
CM1551
Brand: AVGO Pages: 14
Zvox Audio ACCUVOICE AV205 User Manual preview
ACCUVOICE AV205
Brand: Zvox Audio Pages: 2
Easun EM-600 Series Owner'S Manual preview
EM-600 Series
Brand: Easun Pages: 6
B&G electronics PAW-150 Installation And Operation Manual preview
PAW-150
Brand: B&G electronics Pages: 8
Grace m904 Owner'S Manual preview
m904
Brand: Grace Pages: 31
Ramsey Electronics WSA2B Quick Manual preview
WSA2B
Brand: Ramsey Electronics Pages: 2
Audio Control DQL-8 Owner'S Manual preview
DQL-8
Brand: Audio Control Pages: 36
Blaupunkt PHILADELPHIA 855 Operating And Installation Instructions preview
PHILADELPHIA 855
Brand: Blaupunkt Pages: 20
Aiwa TS-W150 Service Manual preview
TS-W150
Brand: Aiwa Pages: 11
Logitech 970114-0403 - X 530 5.1-CH PC Multimedia Home Theater Speaker Sys Setup & Installation preview
970114-0403 - X 530 5.1-CH PC Multimedia Home Theater Speaker Sys
Brand: Logitech Pages: 10
Pyle view PLRD104 Manual preview
PLRD104
Brand: Pyle view Pages: 9
ZheJiang Libiao Robotics LBAP-102LU-900 Instruction Manual preview
LBAP-102LU-900
Brand: ZheJiang Libiao Robotics Pages: 10
Prology MCE-525UR Service Manual preview
MCE-525UR
Brand: Prology Pages: 37
Jensen MP5720USB Quick Start Manual preview
MP5720USB
Brand: Jensen Pages: 3
Magnat Audio QUANTUM 673 Owner'S Manual preview
QUANTUM 673
Brand: Magnat Audio Pages: 14
Polycom RealPresence Group 500 systems System Setup Sheet preview
RealPresence Group 500 systems
Brand: Polycom Pages: 2

Brands by name

Popular brands

Load more brands