manualshive.com logo in svg

Kenwood NX-5800, Common Function Reference

The Kenwood NX-5800 is a high-performance radio communication device designed for seamless connectivity. This user manual provides a comprehensive Common Function Reference guide, enabling users to make the most of their device's features. Download this detailed manual for free from manualshive.com to unlock the full potential of your Kenwood NX-5800.

Share
Download
background image

0

Low Transmit Power

The transmission power can be switched to “Low” by selecting a channel in a system where “High”, “Medium”, or “Auto”
is configured for the transmission power and operating one of the following:

0

Press the 

Low Transmit Power

 key.

0

Select “On” or “Off” after pressing the 

Menu

 key to enter Menu Mode and then selecting “Low Transmit Power”.

With one of the operations, the transmission power of the system to which the selected channel belongs is “Low” by
enabling 

Low Transmit Power

, and the transmission power of the system to which the selected channel belongs returns

to the previous configuration (“High”, “Medium”, or “Auto”) by disabling 

Low Transmit Power

.

0

Medium Transmit Power

The transmission power can be switched to “Medium” by selecting a channel in a system where “High”, “Low”, or “Auto”
is configured for the transmission power and operating one of the following:

0

Select “On” or “Off” after pressing the 

Menu

 key to enter Menu Mode and then selecting “Medium Transmit Power”.

The transmission power of the system to which the selected channel belongs is “Medium” by enabling Medium Transmit
Power, and the transmission power of the system to which the selected channel belongs returns to the previous
configuration (“High”, “Low”, or “Auto”) by disabling Medium Transmit Power.

0

High Transmit Power

The transmission power can be switched to “High” by selecting a channel in a system where “Medium”, “Low”, or “Auto”
is configured for the transmission power and operating one of the following:

0

Press the 

High Transmit Power

 key.

0

Select “On” or “Off” after pressing the 

Menu

 key to enter Menu Mode and then selecting “High Transmit Power”.

With one of the operations, the transmission power of the system to which the selected channel belongs is “High” by
enabling 

High Transmit Power

, and the transmission power of the system to which the selected channel belongs returns

to the previous configuration (“Medium”, “Low”, or “Auto”) by disabling 

High Transmit Power

.

Note

Enabling one of High Transmit Power, 

Medium Transmit Power

, and 

Low Transmit Power

 automatically disables the

configurations of the other transmission powers.

Configuration using KPG-D1/ D1N

0

Configuring 

Transmit Power

 (Personality) in an Analog Conventional system (

 Transceiver Settings > Personal

> Personality > Analog Conventional)

0

Configuring 

Transmit Power

 (Channel Edit) in an Analog Conventional system (

 Transceiver Settings > Zone/

Channel > Channel Edit > Analog Conventional)

0

Configuring 

Transmit Power

 (Personality) in a P25 Conventional system (

 Transceiver Settings > Personal >

Personality > P25 Conventional > General)

0

Configuring 

Transmit Power

 (Channel Edit) in a P25 Conventional system (

 Transceiver Settings > Zone/Channel

> Channel Edit > P25 Conventional > General)

0

Configuring 

Transmit Power

 (Personality) in an NXDN Conventional system (

 Transceiver Settings > Personal

> Personality > NXDN Conventional > General)

0

Configuring 

Transmit Power

 (Channel Edit) in an NXDN Conventional system (

 Transceiver Settings > Zone/

Channel > Channel Edit > NXDN Conventional > General)

0

Configuring 

Transmit Power

 (Personality) in a DMR Conventional system (

 Transceiver Settings > Personal >

Personality > DMR Conventional > General)

0

Configuring 

Transmit Power

 (Channel Edit) in a DMR Conventional system (

 Transceiver Settings > Zone/

Channel > Channel Edit > DMR Conventional > General)

4 TRANSMISSION/ RECEPTION

4.2 Transmit Power

Common FUNC (K, F)/Ver 2.20

79

CONTENTS

INDEX

Summary of Contents for NX-5800





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NX-5800

Bang & Olufsen BeoSound 5 User Manual preview
BeoSound 5
Brand: Bang & Olufsen Pages: 20
Bang & Olufsen BeoSound 5 Manual preview
BeoSound 5
Brand: Bang & Olufsen Pages: 24
Bang & Olufsen BeoSound Ouverture User Manual preview
BeoSound Ouverture
Brand: Bang & Olufsen Pages: 44
Farenheit Mobile Video System Instruction Manual preview
Mobile Video System
Brand: Farenheit Pages: 51
P.L.Z MP-800 Installation Manual preview
MP-800
Brand: P.L.Z Pages: 12
r.LiNK RL4-UCON7-500 Manual preview
RL4-UCON7-500
Brand: r.LiNK Pages: 24
Innovative Technology ITVS-325 Instruction Manual preview
ITVS-325
Brand: Innovative Technology Pages: 14
Watts BA 009MC Installation And Operation Manual preview
BA 009MC
Brand: Watts Pages: 73
Metra Electronics 99-9011 Installation Instructions Manual preview
99-9011
Brand: Metra Electronics Pages: 12
Aiwa CX-JE3 Service Manual preview
CX-JE3
Brand: Aiwa Pages: 68
Altec Lansing ADA880 User Manual preview
ADA880
Brand: Altec Lansing Pages: 8
Monitor Audio Silver FX Owner'S Manual preview
Silver FX
Brand: Monitor Audio Pages: 10
1byone 436NA-0005 Instruction Manual preview
436NA-0005
Brand: 1byone Pages: 25
Qilive Q.1857 User Manual preview
Q.1857
Brand: Qilive Pages: 72
Bell 6B KTS Manual preview
6B KTS
Brand: Bell Pages: 69
ABB Welcome 5101 P Series Manual preview
Welcome 5101 P Series
Brand: ABB Pages: 74
ABB Welcome IP System Manual preview
Welcome IP
Brand: ABB Pages: 82
ABB CM-06DN Series User Manual preview
CM-06DN Series
Brand: ABB Pages: 17

Brands by name

Popular brands

Load more brands