Kenwood NX-5800, Common Function Reference

Page: 157 / 476

0
Behavior examples of when the transceiver receives a Group Call
If the transceiver receives a Group Call, various functions such as Alert Tone are not activated when the transceiver
receives a Group Call again using the same Group ID while the amount of time configured in
Auto Reset Timer elapses.
In this case, even if the Individual ID of the transmitting transceiver is either the same or different, various functions such
as Alert Tone will not be activated when the Group ID for the Group Call received second time or later is the same as the
Group ID for the Group Call received first time.
Receiving
Individual ID 1
Group ID 1
Various
functions such
as Alert Tone
Auto Reset Timer
Individual ID 1
Group ID 1
A
Individual ID 2
Group ID 1
B
Auto Reset Timer
Auto Reset
Timer stops.
Auto Reset Timer Auto Reset Timer Auto Reset Timer
Auto Reset
Timer stops.
Individual ID 3
Group ID 3 Individual ID 2
Group ID 2
C
Individual ID 3
Group ID 3
D E
Auto Reset
Timer stops.
Auto Reset Timer
Auto Reset
Timer stops.
Auto Reset
Timer expires.
Figure 6-3 Alert Tone Restriction from 2nd Call (Group Call)
A: The transceiver receives a Group Call using the same Group ID from the transceiver (Individual ID 1) having the same
Individual ID before the time configured in
Auto Reset Timer elapses, so that various functions such as Alert Tone will not
be activated.
B: Even if the transmitting transceiver has the different Individual ID, the transceiver receives a Group Call using the same
Group ID before the time configured in
Auto Reset Timer elapses, so that various functions such as Alert Tone will not be
activated.
C: Even if the transmitting transceiver has the same Individual ID, the transceiver receives a Group Call using the different
Group ID before the time configured in
Auto Reset Timer elapses, so that various functions such as Alert Tone will be
activated.
D: The transceiver receives a Group Call using the different Group ID from the transceiver having the different Individual ID
before the time configured in
Auto Reset Timer elapses, so that various functions such as Alert Tone will be activated.
E: Even if the transceiver receives a Group Call using the same Group ID, the time configured in Auto Reset Timer has
already elapsed, so that various functions such as Alert Tone will be activated.
Note
If Alert Tone Restriction from 2nd Call is enabled, various functions such as Alert Tone will not be activated upon the
reception of the second and subsequent calls from the same transceiver even if “Off” is configured in Auto Reset
Timer .
Configuration using KPG-D1/ D1N
0
Configuring Alert Tone Restriction from 2nd Call to be enabled or disabled ( Transceiver Settings > NXDN >
NXDN Information > General)
0
Configuring Alert Tone Restriction from 2nd Call to be enabled or disabled ( Transceiver Settings > DMR >
DMR Information > General)
6 SOUND
6.6 Restricting Alert Tone When Consecutively Receiving a Call (Alert Tone Restriction from 2nd Call)
Common FUNC (K, F)/Ver 2.20 126
CONTENTS INDEX