Entering or Deleting a Code
This section explains operations using operating examples for Individual Call Mode. The displays used in this section are
the displays when
Individual Call Acknowledge Request
in an NXDN Conventional system is enabled.
0
Entering a code using the [
G
] or [
H
] key
The following is the operation example to enter “ID 12” in Individual Call Mode:
Select "1".
[ ]
key
[ ]
key
Menu
(
[ ]
) or
[*]
key (Select)
Select "2".
Menu
(
[ ]
) or
[*]
key (Select)
12 : 34
A
M
ID
Back
Individual
12 : 34
A
M
Individual
ID 1
Delete
Select
12 : 34
A
M
Individual
ID 1
Delete
Call
12 : 34
A
M
Individual
ID 10
Delete
Select
12 : 34
A
M
Individual
ID 12
Delete
Call
[ ]
or
[ ]
key
[ ]
or
[ ]
key
[ ]
key
[ ]
key
2 3 4 5 6
1 2 9 0 1
Note
0
The following are the main keys to be used for these operation examples:
To select a code: the
[
G
]
or
[
H
]
key
To determine: the
Menu
(
[
Q
]
) or
[*]
key
0
Pressing and holding the
[
G
]
or
[
H
]
key continuously scrolls the code up or down.
0
The code that can be entered varies depending on the mode and the number of entered digits.
3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
Common FUNC (K, F)/Ver 2.20
61
