![background image](http://html1.mh-extra.com/html/keithley/4200-scs/4200-scs_user-manual_3981678325.webp)
4200-900-01 Rev. K / February 2017
Return to
5-15
Model 4200-SCS User’s Manual
Section 5: How to Generate Basic Pulses
Figure 5-14
Creating a .txt or .csv file for a custom waveform
3. The custom waveform in
is a simple 6-point waveform made up of these voltage
values: 0 V, 4 V, 1 V, 3 V, 2 V, 0 V. Those seven entries are shown in the text editors in
NOTE
The time at each point is determined by the Time Per Point setting in the Arb
Generator tab (Step 4 in
).
4. Save as a waveform file (
.txt
or
.csv
) in the ArbFiles folder at the following command
path location:
C:\S4200\kiuser\KPulse\ArbFiles
Calculation waveform
An example of a calculation waveform is shown in
. The waveform for this example is
named CALC1, but can be any name that is not already used in the Scratch Pad.
The calculation (add, subtract, multiple or divide) performs the selected math operation on two
selected Scratch Pad waveforms. In
, SINE1 is added to RAMP1.
After selecting the two waveforms and the math operation, click
Preview
to display the result of
the calculation. Clicking
Ok
places the waveform in the Scratch Pad.
Figure 5-15
Calculation waveform
Noise waveform
An example of a noise waveform, using the default settings, is shown in
. The
waveform for this example is named NOISE1, but can be any name that is not already used in the
Scratch Pad.
.txt
file format
.csv
file format
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...