![background image](http://html1.mh-extra.com/html/keithley/4200-scs/4200-scs_user-manual_3981678319.webp)
4200-900-01 Rev. K / February 2017
Return to
5-9
Model 4200-SCS User’s Manual
Section 5: How to Generate Basic Pulses
To create custom file arb waveforms (full-arb):
A. Select and configure waveforms:
• After selecting an available waveform type, configuring its settings, and naming it, the
waveform is placed in the Scratch Pad.
• Waveforms will remain in the Scratch Pad until they are deleted by the user.
• Refer to the
for information about the waveform types
available for custom file arb. Refer to
and the steps that follow for details.
B. Copy the waveforms into the Sequencer for Channel 1, Channel 2, or both:
• The order that two or more waveforms appear in a channel sequencer is the order that
the waveforms will be output by that channel.
• Refer to
and the steps that follow for details.
C. Save the waveforms in the Sequencer as a
.kaf
file. See step 5 for
D. Load the
.kaf
waveform file into a pulse generator (using the appropriate PG2 tab): Refer
to
and the steps that follow for details.
E. Turn on the output for enabled channels. See step 7 for
Figure 5-7
Custom Arb file operation: Select and configure waveforms
1) Click the
Arb Generator
tab.
2) Click
New Waveform
to open the Waveform Generator window.
3) Use the drop-down menu to select the
Waveform Type
to be created.
1
2
3
4
5
6
7
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...