![background image](http://html1.mh-extra.com/html/keithley/4200-scs/4200-scs_user-manual_3981678249.webp)
4200-900-01 Rev. K / February 2017
Return to
3-143
Model 4200-SCS User’s Manual
Section 3: Common Device Characterization Tests
Figure 3-117
FlashEndurance-NAND project – SetupDC Definition tab
Vt-MaxGm-Program test
– This test is used to perform a DC voltage sweep on
the gate of the DUT and measure the drain current at each sweep step. The
default Definition tab for this test is shown in
. SMU3 is configured to
perform a 101 point sweep from 0 to 5 V in 50 mV steps.
SMU1 is configured to DC bias the drain at 0.5 V and measure current at each
step of the sweep. The results of the test are shown in the Graph tab (see
). The Vt-MaxGm tests may be replaced with another Vt or DC test. Or,
additional DC tests may be added after this test.
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...