![background image](http://html1.mh-extra.com/html/keithley/4200-scs/4200-scs_user-manual_3981678124.webp)
3-18
Return to
4200-900-01 Rev. K / February 2017
Section 3: Common Device Characterization Tests
Model 4200-SCS User’s Manual
The
Column Names
appear in the data sheet (see the
). A default name (for example, Cs_AB) can be changed by typing in a
different name.
CAUTION
Changing the measurement options will change the Column vector names,
which may then cause any formulator functions to be erased. When using
any of the Keithley Instruments-supplied tests or libraries, please leave
the measurement option set to Cp-Gp.
Test conditions
The DC V bias and drive frequency values used for the test will appear in the data
sheet when
Test Conditions
(shown in
) is enabled (checked). The
column names appear in the data sheet (see the
). A default name (for example, F_AB) can be changed by typing in a
different name.
Advanced settings (terminal properties)
The AC drive voltage and DC bias voltage can be applied to either the CVH1
terminal or the CVL1 terminal. Clicking the
Advanced
button (shown in
) opens the 4210-CVU terminal properties window shown in
Figure 3-13
CVU terminal properties window
By default (reset), AC drive is applied to the CVH1 terminal and the current
measurement is made at the CVL1 terminal. A drop-down menu sets the range for
the current measurement (Auto, 1µA, 30µA, or 1mA). The terminal properties can
be toggled by clicking one of the other AC radio buttons.
By default (reset), DC bias is also applied to the CVH1 terminal. DC bias can
instead be applied to the CVHL terminal by clicking one of the other DC radio
buttons.
shows the four possible configurations for terminal properties.
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...