Juniper J4350, Getting Started Manual

Page: 24 / 284

J4350 and J6350 Services Router Getting Started Guide
J4350 Services Router Overview
The J4350 Services Router is designed primarily for regional or branch offices.
It has a chassis that is 2 U (rack units) in size with a nonredundant AC or DC
power supply, and a Universal Serial Bus (USB) port for external storage.
J4350 routers ordered with the optional Crypto Accelerator card come standard
with 1 GB of memory, while those ordered without the Crypto Accelerator
card come standard with 256 MB of memory. J4350 routers can contain
between 256 MB and 2 GB of memory. For instructions on adding memory,
see “Removing and Installing DRAM Modules” on page 155.
Each J4350 chassis contains four built-in Gigabit Ethernet ports with link
speeds of 10/100/1000 Mbps over a copper interface, and six slots for
field-replaceable Physical Interface Modules (PIMs). Two of the six slots
(slots 3 and 6) support high-speed interfaces (ePIMs).
The J4350 Services Router supports the following field-replaceable
Physical Interface Modules (PIMs):
SFP Gigabit Ethernet ePIM (1 port)
Copper Gigabit Ethernet ePIM (1 port)
ADSL 2/2+ Annex A PIM (1 port)
ADSL 2/2+ Annex B PIM (1 port)
Dual-Port E1 PIM
E3 PIM (1 port)
DS3 (T3) PIM (1 port)
Dual-Port Fast Ethernet PIM
4–port Fast Ethernet ePIM
G.SHDSL PIM (2 ports)
4-port ISDN BRI S/T or U PIM
Dual-Port Serial PIM
Dual-Port T1 PIM
J6350 Services Router Overview
The J6350 Services Router is designed primarily for regional or central
offices. It has a chassis that is 2 U (rack units) in size with an optional
redundant AC or DC power supply, up to 2 GB of memory, and two Universal
4
J6350 Services Router Overview