Juniper J4350, Getting Started Manual

Page: 157 / 284

Installing and Managing J-series Licenses
3.
Go on to “Verifying J-series License Management” on page 137.
Saving License Keys with the CLI
To save the licenses installed on the Services Router to a file with the CLI:
1.
Enter operational mode in the CLI.
2.
To save the installed license keys to a file or URL, enter the following command:
request system license save
filename
|
url
For example, the following command saves the installed license keys to a file
named
license.config
:
request system license save ftp://user@host/license.conf
3.
Go on to “Verifying J-series License Management” on page 137.
Verifying J-series License Management
To verify J-series license management, perform these tasks:
Displaying Installed Licenses on page 137
Displaying License Usage on page 138
Displaying Installed License Keys on page 139
Displaying Installed Licenses
Purpose
Verify that the expected licenses are installed and active on the Services Router.
Action
From the CLI, enter the
show system license
command.
Sample Output
user@router> show system license
License usage:
Licenses Licenses Licenses
Feature name used installed needed
j-flow 0 1 0
bgp-reflection 0 1 0
dlsw 0 1 0
Licenses installed:
License identifier: G03000002223
State: valid
License version: 2
Valid for device: JN001875AB
Features:
bgp-reflection - Border Gateway Protocol route reflection
Verifying J-series License Management
137