Commis s ioning and configuration
KNX Sonos -Gateway
MR-SONOS-REG
© 2019 Albrecht J ung GmbH & Co. KG
p. 55 / 118
Setting
Description
Receive IP address automatically
The address data is automatically received from a DHCP server
located on the data network.
The DHCP server must assign a valid IP address to KNX Sonos
Gateway.
Use fixed IP addresses with DHCP
If you are using DHCP for your Sonos devices, you must
configure your router in such a way that the same
IP address is always assigned to a Sonos device (fixed
IP address).
You have entered the IP addresses for the Sonos devic-
es in the configuration for the master -slave groups. The
IP address is used to identify the Sonos devices. If a
Sonos device now receives a different IP address, it can
no longer be addressed via the KNX Sonos Gateway.
Please refer to your router's manual for information on
how to configure this.
If a DHCP server is not available, the device starts up
after a waiting time with an automatic IP address in the
address range of 169.254.1.0 to 169.254.254.255. As
soon as a DHCP server is available, the device is auto-
matically assigned a new IP address.
Use a permanent IP address
Enter the data manually
You can usually obtain the permitted IP address range and the
subnet mask and standard gateway from the router configuration
interface.
SERIOUS MISCONFIGURA
TION
Default values are set if you select the setting <<Use permanent
IP address>> but then forget to fill in the appropriate fields.
This will result in the device not starting up properly.
Reset the device to its factory settings.
s ettings , p. 56
If problems s hould pers is t, contact Support.
